09-09-2020, 03:05 PM
On the following breakout boards you can connect a MicroPod directly:
The links to the products can be sometimes damaged. Please inform a Admin, that we can fix them.
If someone has other breakoutboards with parallel port, there are not in this list, please inform the admin, so we can add them here.
Benezan-Electronics Breakout-Board Rev. 8.0, you can buy in this stores:
https://www.sorotec.de/
https://www.bulldog-cnc-maschinen.de/
http://tecno-world.com
[Image: http://beamicon2basic.com/breakouts/sorotec/Window.png]
A Mach3-Breakoutboard. Very cheap and well known, you can buy in several online stores:
https://www.omc-stepperonline.com/5-axis...st-v2.html
https://www.manomano.es/p/5-axis-cnc-bre...e-14037412
https://es.grandado.com/products/alta-ca...YyEALw_wcB
https://cnc-robotica.com/es/interfaces/4...-ejes.html
https://cnc-home.es/electr%C3%B3nica-cnc...k0457.html
https://cnccontroller.home.blog/2019/02/...usb-cable/
https://cnc1.lv/en/cnc-controllers/98-ma...apter.html
https://www.banggood.com/es/5-Axis-Stepp...rehouse=CN
https://www.amazon.es/Ils-Tarjeta-Interf...1718&psc=1
[Image: http://beamicon2basic.com/breakouts/banggood1/1.png]
[Image: http://beamicon2basic.com/breakouts/banggood1/2.png]
Here are other boards, ther are also compatible:
https://cnc-robotica.com/es/interfaces/1...carmo.html
[Image: http://beamicon2basic.com/breakouts/cnc-robotica/1.png]
https://cnc-home.es/electr%C3%B3nica-cnc...alelo.html
[Image: http://beamicon2basic.com/breakouts/cnc-home/1.png]
https://cnccontroller.home.blog/2019/02/...per-motor/
[Image: http://beamicon2basic.com/breakouts/CNCc...blog/1.png]
https://cnc1.lv/en/cnc-controllers/203-p...-axis.html
[Image: http://beamicon2basic.com/breakouts/cnc1.lv/1.png]
The links to the products can be sometimes damaged. Please inform a Admin, that we can fix them.
If someone has other breakoutboards with parallel port, there are not in this list, please inform the admin, so we can add them here.
Benezan-Electronics Breakout-Board Rev. 8.0, you can buy in this stores:
https://www.sorotec.de/
https://www.bulldog-cnc-maschinen.de/
http://tecno-world.com
[Image: http://beamicon2basic.com/breakouts/sorotec/Window.png]
A Mach3-Breakoutboard. Very cheap and well known, you can buy in several online stores:
https://www.omc-stepperonline.com/5-axis...st-v2.html
https://www.manomano.es/p/5-axis-cnc-bre...e-14037412
https://es.grandado.com/products/alta-ca...YyEALw_wcB
https://cnc-robotica.com/es/interfaces/4...-ejes.html
https://cnc-home.es/electr%C3%B3nica-cnc...k0457.html
https://cnccontroller.home.blog/2019/02/...usb-cable/
https://cnc1.lv/en/cnc-controllers/98-ma...apter.html
https://www.banggood.com/es/5-Axis-Stepp...rehouse=CN
https://www.amazon.es/Ils-Tarjeta-Interf...1718&psc=1
[Image: http://beamicon2basic.com/breakouts/banggood1/1.png]
[Image: http://beamicon2basic.com/breakouts/banggood1/2.png]
Here are other boards, ther are also compatible:
https://cnc-robotica.com/es/interfaces/1...carmo.html
[Image: http://beamicon2basic.com/breakouts/cnc-robotica/1.png]
https://cnc-home.es/electr%C3%B3nica-cnc...alelo.html
[Image: http://beamicon2basic.com/breakouts/cnc-home/1.png]
https://cnccontroller.home.blog/2019/02/...per-motor/
[Image: http://beamicon2basic.com/breakouts/CNCc...blog/1.png]
https://cnc1.lv/en/cnc-controllers/203-p...-axis.html
[Image: http://beamicon2basic.com/breakouts/cnc1.lv/1.png]