This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Breakout-Boards with parallel port
#1
On the following breakout boards you can connect a MicroPod directly:

The links to the products can be sometimes damaged. Please inform a Admin, that we can fix them.

If someone has other breakoutboards with parallel port, there are not in this list, please inform the admin, so we can add them here.


Benezan-Electronics Breakout-Board Rev. 8.0, you can buy in this stores:
https://www.sorotec.de/
https://www.bulldog-cnc-maschinen.de/
http://tecno-world.com

[Image: Window.png]
A Mach3-Breakoutboard. Very cheap and well known, you can buy in several online stores:

https://www.omc-stepperonline.com/5-axis...st-v2.html
https://www.manomano.es/p/5-axis-cnc-bre...e-14037412
https://es.grandado.com/products/alta-ca...YyEALw_wcB
https://cnc-robotica.com/es/interfaces/4...-ejes.html
https://cnc-home.es/electr%C3%B3nica-cnc...k0457.html
https://cnccontroller.home.blog/2019/02/...usb-cable/
https://cnc1.lv/en/cnc-controllers/98-ma...apter.html
https://www.banggood.com/es/5-Axis-Stepp...rehouse=CN
https://www.amazon.es/Ils-Tarjeta-Interf...1718&psc=1


[Image: 1.png]
[Image: 2.png]

Here are other boards, ther are also compatible:

https://cnc-robotica.com/es/interfaces/1...carmo.html

[Image: 1.png]

https://cnc-home.es/electr%C3%B3nica-cnc...alelo.html

[Image: 1.png]

https://cnccontroller.home.blog/2019/02/...per-motor/

[Image: 1.png]

https://cnc1.lv/en/cnc-controllers/203-p...-axis.html

[Image: 1.png]
Reply


Forum Jump: